Spectre Home
Product Search:
Manufacturers
Services & SupportCredit ApplicationJob Vacancies

BlueTunes ROM QFN

Enquire about this product
BlueTunes ROM QFN Features:
  • Cost-effective single-chip solution for stereo headset and wireless speaker applications
  • A2DP1.2 and AVRCP1.0 profiles enabled with SBC encoder for streaming audio over Bluetooth and remote control functionality
  • MP3 decoder for improved audio quality and reduced power consumption (requires licence from Thomson)
  • Configurable A2DP 5-band EQ
  • High-quality audio 95dB SNR on DAC playback
  • 64MIPS Kalimba DSP coprocessor
  • FastStream, CSR's low-latency codec for video and gaming applications
  • HFP 1.5 (inc. 3-way calling) and HSP 1.0 support
  • cVc support for echo and noise reduction
  • Low power consumption: over 10 hours of audio playback from a 180mAh battery
  • Fully qualified Bluetooth v2.1 + EDR spec system with support for secure simple pairing
  • 8dBm transmit power and 92dBm receive sensitivity
  • 2 integrated linear regulators with 1.5V output from 1.7V to 1.95V input
  • Integrated switch-mode regulator
  • Integrated lithium battery charger
  • 8x8x0.9mm, 0.4mm pitch QFN68 package
  • RoHS compliant and no antimony or halogenated flame retardants
General Description
Based on the BlueCore® Multimedia ROM QFN, the BlueTunes ROM QFN integrates a Bluetooth radio, baseband, DSP, high-quality audio codec, SMPS, LDO and a battery charger for minimal BOM, component count and PCB area.
BlueTunes ROM QFN uses advanced DSP features for the latest stereo enhancements and to improve audio quality, including SBC and MP3 decoder, support for FastStream (low-latency codec) and 5‑band EQ.

Applications
Stereo headset solution with support for echo and noise reduction
Wireless stereo speakers

BlueTunes ROM QFN includes as standard cVc dual and single microphone algorithms for echo and noise suppression.
cVc dual-mic algorithm can provide >30dB of noise suppression in stationary and dynamic noise conditions. An acoustic echo canceller is now integrated into the cVc dual-mic solution. A cVc single-mic provides full-duplex echo cancellation and a 10dB stationary noise suppressor.
BlueTunes ROM QFN includes secure simple pairing, greatly simplifying the pairing process.

Radio
Common TX/RX terminal simplifies external matching, eliminating external antenna switch
BIST minimises production test time
Bluetooth v2.1 + EDR specification compliant

Transmitter
8dBm RF transmit power with level control from on-chip 6-bit DAC over a dynamic range >30dB
Class 2 and Class 3 support with no need for an external power amplifier or TX/RX switch

Receiver
Receiver sensitivity of -92dBm
Integrated channel filters
Digital demodulator for improved sensitivity and co-channel rejection
Real-time digitised RSSI available on HCI interface
Fast AGC for enhanced dynamic range

Synthesiser
Fully integrated synthesiser needs no external VCO, varactor diode, resonator or loop filter. Compatible with crystals 16MHz to 26MHz or an external clock (12MHz to 52MHz)

Physical Interfaces
Synchronous serial interface for system debugging
I²C compatible interface to external EEPROM containing device configuration data (PS Key)

UART interface
2 LED drivers with faders

Kalimba DSP
Very low-power Kalimba DSP coprocessor, 64MIPS, 24-bit fixed point core
Support for SBC and MP3 codec for improved audio quality (MP3 decode functionality requires licence from Thomson)
Single-cycle MAC; 24x24-bit multiply and 56-bit accumulator
32-bit instruction word, dual 24-bit data memory
6Kx32-bit program RAM, 8Kx24-bit + 8Kx24-bit data RAM, 64x32-bit program memory cache when executing from ROM
Ordering Information:
Part Number Package Dimensions Outer Packaging Description
BC57F687A05-IQF-E4+CVCWA QFN 68-lead 8 x 8 x 0.9mm, 0.4mm pitch Tape and Reel BlueTunes ROM QFN

Spectre cannot accept any responsibility for errors and suggest
that the manufacturer's original data is referred to at all times

© Spectre Online 2012